Shelia Richmond. Pool Cleaner. February 23rd , 2018.
For instance, is your pool screened in?, not screened in?, is your pool exposed to seasonal trees, flowers that drop heavy foliage into the water?. Is your pool exposed to fine silt, sand or clay?. Several other factors to consider is the actual pool equipment, plumbing configuration, shape of pool, depth and slope from shallow end to deep end. Features and fixtures should be considered as well, I.E ladders, steps, handrails and islands in pool all have there impact on a pool cleaners performance.
They can do pools of up to 50 squareorfeet in size and of any shape and form. The ultimate difference between the Aquabot Turbo T and T2, is the tracks system brushes used. The Aquabot Turbo T requires a float to help it make swift turns. The Aquabot Turbo T2 has a splittrack system allowing it to turn faster and in tighter areas such as pool steps. Should you wish to remotely control your robot pool cleaner; the Turbo T4RC will do that for you.
The Venturi not only drives the pool cleaner but also creates a vacuum to capture debris. This type of cleaner usually sends the vacuumed debris right to the pool filter. Pressure Driven Water Flow Back to Pool: Water flowing back to the pool through a dedicated plumbing line is pressurized by using a secondary pump (booster pump) which enhances the Venturi effect thus allowing the cleaner to move faster and collect more debris in a shorter period of time. This type of cleaner usually has its own collection bag, net or screen. Thus allowing longer run cycles between cleaning of the collection vessel and the pools main filter.
With the above factors in mind, you will be able to better evaluate the suitability of the three main types of automatic inground pool cleaners. These three categories include suctionside, pressureside and robotic cleaners. Starting with suctionside automatic pool models for inground swimming pools, these units attach to your pools skimmer or designated cleaning line and operate off the existing suction. This suction not only allows the automatic vacuums to vacuum up debris, it also provides the power needed for the units to mobilize around the pool.
That being said you would have to manually alternate the cleaner and skimmer operation. Basic Pool with Dedicated Cleaner Line: This is where a line has been plumbed from the side wall of the pool back to the suction side of the pump. A correct installation of such a line would include a valve that allows you to control the amount of water being drawn through the dedicated line thus allowing speed control of the respective cleaner. Each manufactures cleaner and model will specify the correct speed of the cleaner by either providing a gauge in which to measure the cleaners speed at time of installation or a automatic bypass valve that regulates the cleaners speed.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does submiturlsearchengine claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.