Kristy Bonner. Pool Cleaner. February 24th , 2018.
They require a dedicated line for suction or a skimmer outlet is used. They are very good cleaners and can pick up very fine debris in a swimming pool. No separate pump to operate no extra time clock can all relate to more money in parts and higher energy cost. However I feel their not very good in a pool with a large amount of pool debris. The leaves that get sucked up go to a separate canister or to the pool pump basket. The other down side is most tend to do well only in a pool with no deep end more of an even depth such as a play pool.
Robotic pool cleaners save a great deal of money in operating costs, because these pool cleaners do not require your pool pump and filtration system to be running for the pool cleaner to work. This also means you do not have to clean your filtration system after each use, using more electricity and losing chemically treated water through the filter backwash cycle. Robotic pool cleaners are available in many sizes and models designed for average size above ground swimming pools, up to the largest commercial facilities and water parks.
The Venturi not only drives the pool cleaner but also creates a vacuum to capture debris. This type of cleaner usually sends the vacuumed debris right to the pool filter. Pressure Driven Water Flow Back to Pool: Water flowing back to the pool through a dedicated plumbing line is pressurized by using a secondary pump (booster pump) which enhances the Venturi effect thus allowing the cleaner to move faster and collect more debris in a shorter period of time. This type of cleaner usually has its own collection bag, net or screen. Thus allowing longer run cycles between cleaning of the collection vessel and the pools main filter.
The Turbo T Jet sits on four wheels and is quite identical to the Pool Rovers mentioned in the previous section. It is specifically designed to clean abrasive floor surfaces such as concrete surfaces for pools of up to 50 squareorfeet in size. This brushless pool cleaner uses a water jet to clean abrasive surfaces, where other pool cleaning robot models tend to wear and tear their brushes. The Turbo T Jet has a cleaning time of 1 hour and is programmed with an auto shutoff feature after 2 hours.
That being said you would have to manually alternate the cleaner and skimmer operation. Basic Pool with Dedicated Cleaner Line: This is where a line has been plumbed from the side wall of the pool back to the suction side of the pump. A correct installation of such a line would include a valve that allows you to control the amount of water being drawn through the dedicated line thus allowing speed control of the respective cleaner. Each manufactures cleaner and model will specify the correct speed of the cleaner by either providing a gauge in which to measure the cleaners speed at time of installation or a automatic bypass valve that regulates the cleaners speed.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does submiturlsearchengine claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.